Custom Plastic Manufacturing Capabilities in New Jersey

Pro Plastics is a custom plastic manufacturer in Linden, New Jersey, serving OEMs since 1968. From precision CNC machining to complete fabrication, we bring the materials knowledge and the tolerances your most demanding parts require.

A Plastics-Only Manufacturer and Fabricator in Linden, NJ

Pro Plastics is a custom plastic manufacturer and fabricator in Linden, New Jersey, serving OEMs since 1968. Founded in Linden as a small plastic fabrication shop, we have grown into a manufacturing partner serving companies across the globe.

Pro Plastics machines engineering plastics — and only plastics. Unlike metal, plastics move: they expand under heat, relieve internal stress as material comes off, and creep under clamping load. That focus is how our plastic machining services hold tolerances as tight as ±0.001". The same material knowledge goes into our custom plastic fabrication: cutting, routing, bending and forming, bonding, and assembly.

Prototype Through Production

Whether you need a single prototype or thousands of production parts, you get the same quality and attention to detail. We machine plastic parts up to 48" × 96", and we fabricate acrylic sheet up to 96" × 48" and 4" thick. Send a print and we return a quote within 24 hours, with material selection and DFM review included.

What We Do

Comprehensive custom plastic manufacturing services under one roof — CNC machining, fabrication, and secondary operations.

Precision plastics machining services — complex geometries held to ±0.001" in PEEK, Delrin, UHMW and more.

Key Features:

  • Parts up to 48" × 96"
  • Prototype to production runs
  • Tolerances to ±0.001"
  • Complex 3D contours

Compatible Materials:

PEEKUltemDelrinNylonUHMWTeflonAcetal
Learn More
CNC Machining

Full-service plastic fabrication including cutting, routing, bonding, and assembly of custom components.

Key Features:

  • Precision cutting & routing
  • Drilling & tapping
  • Bending & forming
  • Solvent & adhesive bonding
  • Assembly services

Compatible Materials:

AcrylicPolycarbonateHDPEPVCABSPhenolic
Learn More
Custom Fabrication

Complete finishing services including threading, heat treating, and surface finishing.

Key Features:

  • Threading & tapping
  • Heat treating/annealing
  • Surface grinding
  • Polishing & finishing
  • Marking & engraving

Compatible Materials:

All engineering plastics
Learn More
Secondary Operations

Why OEMs Specify Pro Plastics

Serving OEMs since 1968 — judgment about which plastic belongs in which part, not just the capacity to cut it.

Serving OEMs since1968
Quotes returned within24 hrs
Material selection guidance
Prototype through production

Precision Tolerances

Capable of meeting your most demanding dimensional requirements.

Standard±0.005"
Precision±0.002"
High Precision±0.001"
Surface Finish32 Ra or better

Engineering Plastics We Work With

Three figures to shortlist on, for the materials with their own pages here. Each material links to its full property table, with the datasheet behind every figure.

Tensile strength, maximum continuous service temperature and FDA food-contact status by material
MaterialTensile strengthMax continuous service tempFDA food contact
Ultem® (PEI)17,000psiat yieldYield basis inferred from the datasheet; 16,000–17,500 psi across suppliers.338°FMCAM rates 340 °F for 20,000 hours in air.Yes, natural gradeNatural (unfilled) grade only, under 21 CFR 177.1595.
Delrin® (Acetal)11,000psiat yield180°FYes, natural gradeApplies to natural Delrin 150SA and Acetron POM-H stock under 21 CFR 177.2480. Black and filled grades are not covered. The linked brochure lists the grade as FDA compliant; the CFR section is from the k-mac Plastics and Ready Plastics grade pages. Confirm the grade on the mill cert.
UHMW Polyethylene3,100psiat yield180°FYes, natural gradeNatural (virgin) grade, under 21 CFR 177.1520.
PEEK (Polyether Ether Ketone)16,000psiat yield480°FYes, natural gradeNatural grade only, under 21 CFR 177.2415. Excludes contact with infant formula and breast milk.
Nylon 6/612,000psiat yield185°FEnsinger's long-term rating. MCAM's sheet prints 210 °F in its 20,000-hour row, against 80 °C (176 °F) in its own metric column.YesUnder 21 CFR 177.1500.
PTFE (Teflon®)3,200psiat break500°FYes, virgin gradeVirgin (unfilled) grade only, under 21 CFR 177.1550.
Polycarbonate9,000psiat yield250°FGrade dependentGeneral-purpose UV-stabilised sheet carries no food-contact statement. Food-contact grades comply with 21 CFR 177.1580.
Cast acrylic10,500psiultimate, no yield point180°FGrade dependentClear sheet meets the extractive tests of 21 CFR 177.1010(b) with one exception for ultraviolet absorbers in 50% alcohol. Most coloured sheet is not compliant.
PVC Type I7,300psiat yield140°FNot ratedThe cited suppliers make no food-contact statement for this grade.
HDPE3,700psiat yield176°FRöchling's long-term rating. MCAM rates 180 °F for 20,000 hours in air.Yes, natural gradeNatural grade, under 21 CFR 177.1520.
Canvas phenolic (CE)11,000psiultimate, no yield point239°FTemperature index (UL 746B, electrical)Electrical temperature index. The mechanical index is 257 °F.Not ratedThe cited suppliers make no food-contact statement for this grade.
G-1043,000psiultimate, no yield point266°FTemperature index (UL 746B, electrical)Electrical temperature index. The mechanical index is 284 °F.Not ratedThe cited suppliers make no food-contact statement for this grade.

Notes on the figures

  • UHMW Polyethylene: Tensile strength is at yield. Datasheets that list 5,800 psi for UHMW are quoting strength at break, at about 300% elongation, which is not a design stress.
  • Nylon 6/6: Figures are dry, as machined. Strength and stiffness fall as the part takes up moisture; impact resistance rises.
  • PTFE (Teflon®): PTFE has no yield point, so its tensile strength is at break and is not a design stress.
  • Cast acrylic: Figures are for cell-cast sheet. Extruded sheet, rod and tube differ.
  • PVC Type I: Figures are for Type I. Type II is a different formulation and its values differ.
  • Canvas phenolic (CE): Figures are for canvas (CE) grade, lengthwise where the datasheet gives two directions; crosswise values are lower. Linen (LE) grade is a finer-weave cotton and its values differ. A laminate has no yield point, so tensile strength is the ultimate value.
  • G-10: Figures are for G-10, lengthwise where the datasheet gives two directions; crosswise values are lower. FR-4 is the flame-retardant grade and its published values differ. A laminate has no yield point, so tensile strength is the ultimate value.

Typical values for the stock-shape grade named on each material page, not a specification. Service-temperature ratings depend on the maker and the test basis, so check the material page and its datasheet before you design to a figure.

Browse all materials

Our Process

From quote to delivery, we ensure quality at every step.

01

Quote Request

Submit drawings for review

02

Engineering Review

DFM analysis & material selection

03

Production

Precision manufacturing

04

Quality Check

Inspection & verification

05

Delivery

Secure packaging & shipping

Serving Critical Industries

Our capabilities support demanding applications in aerospace, medical, semiconductor, and other precision industries.

View Industries
Aerospace
Medical
Semiconductor
Electronics
Automotive
Chemical

Have a Project in Mind?

Send us your drawings and specifications. We'll provide a detailed quote and manufacturing recommendations within 24 hours.

Request Quote